How to read tablature / tabs and guitar tablature some technical terms

How to read tablature / tabs and guitar tablature some technical terms

Sabtu, 03 April 2010

ads

We have to discuss the "appalling" in a guitar technique that is about the formal term is a tab or tablature. Tablature actually not only on guitar, but it can also be used for other musical instruments such as bass, banjo, mandolin, drums and so on. Here I will limit it to the guitar tablature, with easily understandable explanations (semoga. .. he he he). Maybe with all my explanations, you will immediately understand, but the practice is very complicated and complex .... he he he. Starting from an understanding of tablature first, then a new step on the complex technical terms tablature.
Definition tablature: six lines describing the guitar fingerboard, top line shows the most high-pitched string (high E / E high / strings no 1 - standard tuning).

Gambar tab 1

1. hammer on : note quotes the beginning (first) / lower notes by picking (pick with a pick) and then ring a higher note with another finger without picking again
2. pull off : place the same finger on the notes that will be played. Notes plucked early, drag your first finger (picking notes that early) to ring next note
   
3. slide : learned early notes, slide the finger on the next note (lower or higher). There are two slides in here first: without picking the next note (once learned 2 notes), second: by picking the next note (two-stringed, 2 notes)
4. pick slide : ring a note by using the pick, so there is sound gerit / drag (scratch)
   
5. tapping : dengan ujung jari telunjuk atau tengah ketuklah not yang ingin dibunyikan pada fretboard
   
6. trill : alternating rapidly between the initial and second notes using hammer ons and pull off
   
7. bend : firmly press the left fingers on the fretboard and then raise your fingers up to the tone produced by a rise.
   
8. bend and release : strings, bending to tune up 1 / 2 or 1, then back again to the original tone
   
9. pre bend : Bending down to tune up 1 / 2 or a 1, freshly picked
10. pre bend and release : Bending down to tune up 1 / 2 or 1, strings, bending again until it goes back to the early notes.
    
11. unison bend : bending at the same two notes
12. vibrato : vibration effects, with bending, getarkan string with bending up and down quickly, could with his left hand or using a tremolo / whammy bar
    
13. wide atau exaggerated vibrato : Bending up and down even more strongly than usual vibrato
    
14. natural harmonic : ring a note with a flicked (lightly) with the left finger to ring like a bell "ting"
15. artificial harmonic : ring a note by the usual, do at picking the right hand side accompanied with thumb, index finger or shoots, with the volume or high-level distortion effects will yield sound of screeching harmonics.
16. tremolo bar : use the tremolo / whammy bar, lower notes on the tablature so far shown, then turn again to the original notes.
17. palm muting : set aside a quiet note with the palm of your right hand (left Handed for guitarist) / left (for right Handed guitarist)
18. muffled strings :

Put the finger without pressing too firmly on the fretboard to produce percussive sound

19. There are several other terms such as rhythm slashes, etc., can not explain as you go along ads

How to read tablature / tabs and guitar tablature some technical terms Reviewed by NajlA On Sabtu, 03 April 2010, at 19.16 Rating: 5
Saat ini kamu sedang membaca artikel "How to read tablature / tabs and guitar tablature some technical terms" by NajLa pada hari Sabtu, 03 April 2010 waktu 19.16, dalam kategori Acoustic Guitar, Electric Guitar, Tips . Kamu boleh menyebarluaskan artikel How to read tablature / tabs and guitar tablature some technical terms ini dengan menyertakan link sumber dari blog ini. Mudah-mudahan Artikel Mengenai How to read tablature / tabs and guitar tablature some technical terms yang ada di blog pom-ponkini bisa bermanfaat bagi semuanya.